M40 ATV Broadcast Spreader

ITEM# M40 12V Electric Broadcast ATV Spreader

• 100lb/45kg Hopper capacity – rustproof poly construction
• EV-N-SPRED PRO Dual Port Adjustable Shut-Off System
• High-Torque 12-volt motor in thermoplastic case
• 150lb/67kg Load bearing capacity - what the frame will support
• Wiring harness and Remote Control Pendant with On/Off and Open/Close switch
• Stainless Steel Chassis with Integrated Vertical or Horizontal Mounting System
• Rain Cover included
• Washout port for easy cleaning
• Fully assembled
• 5-Year Limited Warranty
• Optional Motor Speed Control
• Ships as 70 lb box due to package oversize

The M40 is the ultimate addition to your ZTR mower, utility vehicle, golf cart, ATV or anything with wheels. The M40 is equipped with the EarthWay Exclusive Electronic Control Module that allows you to not only remotely turn the motor On/Off, but to also control the Open/Close of the shut-off material flow, thus eliminating the need for cables or ropes. The numbered rotary-dial rate control allows for positive setting control and easy repeatability. The EV-N-SPRED PRO Dual Port Adjustable Shut-Off technology allows the user to control the balancing of the spread pattern on both the left and right side throwing ports to equal the center. The M40ECM uses a high-torque 12-volt motor, mounted in the hopper and protected by a thermoplastic case to protect it from the elements. The unique stainless steel chassis design will not only easily support the 100lb/45kg capacity rustproof poly hopper but also to bolt to any vertical or horizontal surface. This versatility of the M40ECM is what makes it the choice of landscaper and turf professionals worldwide.

Allows spread-width control from the driver's seat. This control box pulses current to the motor, ensuring safe operation and less wear and tear on the motor. Allows the spread pattern to be reduced to as little as two feet. Includes wiring for use in utility vehicles, ATVs, pickup trucks, zero-turn mowers and tractors. Made in the USA.

ITEM# 77009 12 Volt Motor Speed Control

Motor Speed Control for all 12-volt spreaders. Will reduce the RPM of all 12-volt spreader, reducing the spread width. Allows for operation at full speed, variable speed, or off. Comes with a whip connector so that you can wire this into older models.